Electrode and dielectric layer interface device engineering study using furan flanked diketopyrrolopyrrole-dithienothiophene polymer based organic transistors.

We successfully demonstrated a detailed and systematic enhancement of organic field effect transistors (OFETs) performance using dithienothiophene (DTT) and furan-flanked diketopyrrolopyrrole based donor-acceptor conjugated polymer semiconductor namely PDPPF-DTT as an active semiconductor. The self-assembled monolayers (SAMs) treatments at interface junctions of the semiconductor-dielectric and at the semiconductor-metal electrodes has been implemented using bottom gate bottom contact device geometry. Due to SAM treatment at the interface using tailored approach, the significant reduction of threshold voltage (Vth) from - 15.42 to + 5.74 V has been observed. In addition to tuning effect of Vth, simultaneously charge carrier mobility (µFET) has been also enhanced the from 9.94 × 10-4 cm2/Vs to 0.18 cm2/Vs. In order to calculate the trap density in each OFET device, the hysteresis in transfer characteristics has been studied in detail for bare and SAM treated devices. Higher trap density in Penta-fluoro-benzene-thiol (PFBT) treated OFET devices enhances the gate field, which in turn controls the charge carrier density in the channel, and hence gives lower Vth = + 5.74 V. Also, PFBT treatment enhances the trapped interface electrons, which helps to enhance the mobility in this OFET architecture. The overall effect has led to possibility of reduction in the Vth with simultaneous enhancements of µFET in OFETs, following systematic device engineering methodology.

Pyrrolo[3,2-b]pyrrole-1,4-dione (IsoDPP) End Capped with Napthalimide or Phthalimide: Novel Small Molecular Acceptors for Organic Solar Cells.

We introduce two novel solution-processable electron acceptors based on an isomeric core of the much explored diketopyrrolopyrrole (DPP) moiety, namely pyrrolo[3,2-b]pyrrole-1,4-dione (IsoDPP). The newly designed and synthesized compounds, 6,6'-[(1,4-bis{4-decylphenyl}-2,5-dioxo-1,2,4,5-tetrahydropyrrolo[3,2-b]pyrrole-3,6-diyl)bis(thiophene-5,2-diyl)]bis[2-(2-butyloctyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione] (NAI-IsoDPP-NAI) and 5,5'-[(1,4-bis{4-decylphenyl}-2,5-dioxo-1,2,4,5-tetrahydropyrrolo[3,2-b]pyrrole-3,6-diyl)bis(thiophene-5,2-diyl)]bis[2-(2-butyloctyl)isoindoline-1,3-dione] (PI-IsoDPP-PI) have been synthesized via Suzuki couplings using IsoDPP as a central building block and napthalimide or phthalimide as end-capping groups. The materials both exhibit good solubility in a wide range of organic solvents including chloroform (CF), dichloromethane (DCM), and tetrahydrofuran (THF), and have a high thermal stability. The new materials absorb in the wavelength range of 300-600 nm and both compounds have similar electron affinities, with the electron affinities that are compatible with their use as acceptors in donor-acceptor bulk heterojunction (BHJ) organic solar cells. BHJ devices comprising the NAI-IsoDPP-NAI acceptor with poly(3-n-hexylthiophene) (P3HT) as the donor were found to have a better performance than the PI-IsoDPP-PI containing cells, with the best device having a VOC of 0.92 V, a JSC of 1.7 mAcm-2, a FF of 63%, and a PCE of 0.97%.

Righting the Misperceptions of Men Having Sex with Men: A Pre-Requisite for Protecting and Understanding Gender Incongruence in Vietnam.

Protecting the rights of the lesbians, gays, bisexuals, transgender, intersex, and queers (LGBTIQ) population requires, first and foremost, a proper understanding of their sexual orientation and gender identity. This study highlights a severe misunderstanding and lack of knowledge among health professionals in Vietnam with regard to the men who have sex with men (MSM) and transgenders. This study uses (i) a survey based on the convenience sampling method among 150 health workers that covered 61 questions and (ii) 12 in-depth interviews in two metropolitan centres in Vietnam, Hanoi and Ho Chi Minh city. Three main topics are explored: (i) the general knowledge of healthcare workers about MSM and transgenders; (ii) their knowledge about the sexual reproductive health and human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) risks of MSM and transgenders; and (iii) their attitudes and behaviors towards MSM and transgenders. One of the notable findings is how prevalent the misperceptions are across the board, namely, in staff of both sexes, in both cities, at various kinds of medical facilities, at different work positions and educational levels. Half of the respondents consider transgenders to have a curable mental problem while 45% say MSM only have sex with males. Most remarkably, 12.7% state if they have any choice, they want nothing to do with MSM and transgenders. The study finds there is a considerable percentage of health professionals who lack knowledge about the diversity of sexual orientation, gender identity, and health issues related to the sexual minorities and gender non-conforming population. To improve the clinical process for serving these at-risk groups, the study suggests the continual education for the health workers needs to be added to their formal as well as in-job training.

The Dark Side of Female HIV Patient Care: Sexual and Reproductive Health Risks in Pre- and Post-Clinical Treatments.

This study examines the pre- and post-clinical issues in human immunodeficiency virus (HIV) care and treatment for women and girls of high-risk population groups-namely sex workers, injecting drug users, women living with HIV, primary sexual partners of people living with HIV, adolescent girls who are children of these groups, and migrant young girls and women-in five provinces and cities in Vietnam. Through a sample of 241 surveyed participants and 48 respondents for in-depth interviews and 32 respondents in the focus group discussions, the study identifies multiple barriers that keep these groups from receiving the proper health care that is well within their human rights. Most respondents rated HIV testing as easily accessible, yet only 18.9% of the surveyed women living with HIV disclosed their infection status, while 37.8% gave no information at the most recent prenatal care visit. The level of knowledge and proper practices of sexual and reproductive health (SRH) care also remains limited. Meanwhile, modern birth control methods have yet to be widely adopted among these populations: only 30.7% of respondents reported using condoms when having sex with their husband. This increases the risks of unwanted pregnancy and abortion, as well as vulnerability to sexually transmitted infections (STIs) and HIV transmission. On the other hand, HIV-related stigma and discrimination at health care settings are still pervasive, which create significant barriers for patients to access proper care services. Based on these results, six recommendations to improve SRH status of women and girls of populations at high risk are put forward.

Control of Geminate Recombination by the Material Composition and Processing Conditions in Novel Polymer: Nonfullerene Acceptor Photovoltaic Devices.

Herein, we report on the charge dynamics of photovoltaic devices based on two novel small-molecule nonfullerene acceptors featuring a central ketone unit. Using ultrafast near-infrared spectroscopy with optical and photocurrent detection methods, we identify one of the key loss channels in the devices as geminate recombination (GR) of interfacial charge transfer states (CTSs). We find that the magnitude of GR is highly sensitive to the choice of solvent and annealing conditions. Interestingly, regardless of these processing conditions, the same lifetime for GR (∼130 ps) is obtained by both detection methods upon decomposing the complex broadband transient optical spectra, suggesting this time scale is inherent and independent of morphology. These observations suggest that the CTSs in the studied material blends are mostly strongly bound, and that charge generation from these states is highly inefficient. We further rationalize our results by considering the impact of the processing on the morphology of the mixed donor and acceptor domains and discuss the potential consequences of the early charge dynamics on the performance of emerging nonfullerene photovoltaic devices. Our results demonstrate that careful choice of processing conditions enables enhanced exciton harvesting and suppression of GR by more than 3 orders of magnitude.

Vinylene and benzo[c][1,2,5]thiadiazole: effect of the π-spacer unit on the properties of bis(2-oxoindolin-3-ylidene)-benzodifuran-dione containing polymers for n-channel organic field-effect transistors.

Two polymers based on (3E,7E)-3,7-bis(2-oxoindolin-3-ylidene)benzo[1,2-b:4,5-b']difuran-2,6(3H,7H)-dione (BIBDF) coupled with (E)-2-(2-(thiophen-2-yl)vinyl)thiophene (TVT) or dithienylbenzothiadiazole (TBT), namely PBIBDF-TVT and PBIBDF-TBT were synthesized via the Stille coupling reaction. The effect of benzothiadiazole or vinylene-π spacer of the copolymers on optical properties, energy levels, electronic device performance and microstructure were studied. It was found that PBIBDF-TBT based OFET devices, annealed at 180 °C, showed better performance with the highest electron mobility of 2.9 × 10-2 cm2 V s-1 whereas PBIBDF-TVT polymer exhibited 5.0 × 10-4 cm2 V s-1. The two orders of magnitude higher electron mobility of PBIBDF-TBT over PBIBDT-TVT is a clear indicator of the better charge transport ability of this polymer semiconductor arising from its higher crystallinity and better donor-acceptor interaction.

Molecular Engineering Strategy for High Efficiency Fullerene-Free Organic Solar Cells Using Conjugated 1,8-Naphthalimide and Fluorenone Building Blocks.

We designed, synthesized, and characterized a series of novel electron deficient small molecule nonfullerene acceptors based on 1,8-naphthalimide (NAI) and 9-fluorenone (FN) with different branched alkyl chains using various techniques. These molecules are based on an acceptor-donor-acceptor-donor-acceptor (A1-D-A2-D-A1) molecular design configuration with NAI as the end-capping acceptor (A1), FN as electron-withdrawing central (A2) group, and thiophene ring as a donor (D) unit. These materials are named as NAI-FN-NAI (BO) and NAI-FN-NAI (HD) where BO and HD represent butyloctyl and hexyldecyl alkyl groups, respectively. To further modify energy levels of these materials, we converted the weak electron withdrawing ketonic group (C═O) attached to the FN moiety of NAI-FN-NAI (BO) to a stronger electron withdrawing cyano group (C≡N) to obtain the compound NAI-FCN-NAI (BO) by keeping the same alkyl chain. The optical, electrochemical, and thermal properties of the new acceptors were studied. The materials exhibited higher to medium band gaps, low lowest unoccupied molecular orbital (LUMO) energy levels, and highly thermally stable properties. Organic solar cell devices employing conventional poly(3-hexylthiophene) (P3HT) a donor polymer and the newly designed small molecules as the acceptor were investigated. Among all new materials, organic solar cell devices based on NAI-FN-NAI (BO) as an acceptor exhibit the highest performance with an open circuit voltage (VOC) of 0.88 V, a short-circuit current density (JSC) of 9.1 mAcm-2, a fill factor (FF) of 45%, and an overall power conversion efficiency (PCE) of 3.6%. This is the first report of 9-fluorenone based nonfullerene acceptor with P3HT donor in organic solar cell devices with such a promising performance.

Sensors: A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers (Adv. Mater. 21/2016).

An ambipolar organic field-effect transistor (OFET) based on poly(diketopyrrolopyrrole-terthiophene) (PDPPHD-T3) is shown by P. Sonar, H. Haick, and co-workers on page 4012 to sensitively detect xylene isomers at low to 40 ppm level in multiple sensing features. Combined with pattern-recognition algorithms, a sole ambipolar FET sensor, rather than arrays of sensors, is able to discriminate highly similar xylene structural isomers from each other.

A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers.

An ambipolar poly(diketopyrrolopyrrole-terthiophene)-based field-effect transistor (FET) sensitively detects xylene isomers at low ppm levels with multiple sensing features. Combined with pattern-recognition algorithms, a sole ambipolar FET sensor, rather than arrays of sensors, can discriminate highly similar xylene structural isomers from one another.

Effect of polyelectrolyte electron collection layer counteranion on the properties of polymer solar cells.

Polyviologen (PV) derivatives are known materials used for adjusting the work function (WF) of cathodes by reducing the electron injection/collection barrier at the cathode interface. To tune and improve device performance, we introduce different types of counteranions (CAs), such as bromide, tetrafluoroborate, and tetraphenylborate, to a PV derivative. The effective WF of the Al cathode is shown to depend on the size of the CA, indicating that a Schottky barrier can be modulated by the size of the CA. Through the increased size of the CA from bromide to tetraphenylborate, the effective WF of the Al cathode is gradually decreased, indicating a decreased Schottky barrier at the cathode interface. In addition, the change of the power conversion efficiency (PCE) and the short circuit current (Jsc) value show good correlation with the change of the WF of the cathode, signifying the typical transition from a Schottky to an Ohmic contact. The turn-on electric field of the electron-only device without PV was 0.21 MV/cm, which is dramatically higher than those of devices with PV-X (0.07 MV/cm for PV-Br, 0.06 MV/cm for PV-BF4, and 0.05 MV/cm for PV-BPh4) This is also coincident with a decrease in the Schottky barrier at the cathode interface. The device ITO/PEDOT/P3HT:PCBM/PV/Al, with a thin layer of PV derivative and tetraphenylborate CA as the cathode buffer layer, has the highest PCE of 4.02%, an open circuit voltage of 0.64 V, a Jsc of 11.6 mA/cm2, and a fill factor of 53.0%. Our results show that it is possible to improve the performance of polymer solar cells by choosing different types of CAs in PV derivatives without complicated synthesis and to refine the electron injection/collection barrier height at the cathode interface.